ProDAQ 6132-AA Isolated Precision Voltage Input LXI Instrument
- Analog Inputs: Each channel of the ProDAQ 6132 has a 16-bit SAR ADC to provide the highest possible measurement accuracy. Each channel is isolated from any other and also from the chassis, with a working isolation voltage up to 300V continuous. This allows any channel not only to float to different voltage potentials but also reduces the possibility of ground loop error. Each channel is protected against overvoltage, both short-term transient spikes as well as constant DC voltages up to ±30V. An EMI filter is included per channel to reduce the possibility of error due to high-frequency conducted noise. Each channel has four independent gain and three independent filter settings.
- Simultaneous Sampling: The ProDAQ 6132 has a dedicated ADC per channel. This allows for true simultaneous sampling of all channels. The maximum scan rate per module is 2000 S/s.
- Various Mounting Options: The ProDAQ 6132 comes in a 1U high unit suitable for rack mount in a standard 19” rack if used with the ProDAQ 5725 Rack-Mount kit. The ProDAQ 6132 can also be desktop mounted using the ProDAQ 5726 Stackable Tabletop Feet Set.
- 19”, 1U Solution for 32 Voltage Input Channels
- Channel Isolation up to ±300V continuous (input to input, inputs to ground and between inputs, outputs and power supplies)
- Simultaneous Sampling of all channels
- Up to 2kS/s sample rate
- Gains of 1, 2, 4 and 8
- Three Low Pass Filters of 10Hz, 100Hz and 1kHz
- Redundant Power Supply
- Dual Ethernet Ports
Size Guides
SIZE GUIDE
JEANS
| SIZE | XS | S | M | L | XL | XXL |
|---|---|---|---|---|---|---|
| BUST | 88 | 89 | 90 | 91 | 92 | 93 |
| WAIST | 55 | 56 | 58 | 59 | 62 | 65 |
| HIPS | 90 | 92 | 94 | 95 | 96 | 98 |
T-SHIRTS
| SIZE | XS | S | M | L | XL | XXL |
|---|---|---|---|---|---|---|
| BUST | 60 | 62 | 65 | 66 | 68 | 69 |
| WAIST | 50 | 55 | 58 | 62 | 65 | 66 |
| HIPS | 80 | 82 | 85 | 86 | 88 | 89 |
Delivery and return
Delivery and return
Shipping Information
Shipping Information
Composition and care
Composition and care
Description
Description:
The ProDAQ 6132 is an LXI instrument designed for up to 32-channel isolated precision voltage measurements. Each channel is isolated from both the chassis and all other channels.
The ProDAQ 6132 provides an easy to use, cost effective and scalable solution for the most demanding voltage measurement applications. As a standalone LXI instrument it can be directly connected to your network and operated either through the integrated web pages or integrated to your data acquisition application using the VISA I/O library. Measurement data can be read from the instrument or directly streamed to one or several servers. Multiple devices can be synchronized via the IEEE1588 precision time protocol. The unit is equipped with a redundant power supply and two Ethernet ports.
Specifications
Specifications:
- General
- Number of signal channels: 32
- Isolation: 300 VRMS (Channel to channel and channel to chassis)
- ADC Resolution: 16-bit
- ADC Sampling Rates: 1 Hz to 2 kHz, 1 Hz resolution
- Analog Bandwidth, 3dB: 10 Hz, 100 Hz, 1 kHz
- Analog BW Tolerance: ±2 % typical, ±10 % maximum
- Channel Input Protection: ±30 V DC
- Input Impedance: ≥1 MΩ, 10 MΩ typical
- Input Connectors: 25-pin Female D-Sub x 8 (4 Channels per connector)
- Voltage Measurement
- Input Signal Type: Differential, DC coupled, Voltage
- Input Ranges: ±1.25 V, ±2.5 V, ±5 V, ±10 V
- Gain Steps, G: 1, 2, 4, 8
- Voltage Resolution: 305/G µV
- Input Offset Error: ±(0.05+0.2/G) mV typical, ≤ ±0.1% FSO
- Full Scale Error: ±(0.1+0.2/G) mV typical, ≤ ±0.1% FSO
- DC Accuracy, any voltage: ±(0.1+0.2/G) mV typical, ≤ ±0.1% FSO
- Digitizer Non-Linearity: ±0.01% maximum
- Input Offset Current: ±2 nA typical, ±10 nA maximum, 10 °C to 30 °C
- Input Bias Current: ±15 nA typical, ±50 nA maximum, 10 °C to 30 °C
- Filtering: 2-pole analog Bessel anti-aliasing filter, 10 Hz, 100 Hz and 1 kHz selectable
- Filter implementation: Hardware
- CMRR, DC to 50Hz: ≥75dB, 120 dB typical, all gains
- CMV: ± 10 V
- Temperature Stability: 8 ppm/˚C typical at Full Scale, < 70 ppm/˚C maximum
- Calibration: External calibration source
- AC Performance
- Sinewave, 10 Hz, Gain 1, 18 VPP
- 100 Hz Filter, 1 ksps
- SNR: 92 dB typical, 90 dB minimum
- SINAD: 91 dB typical, 89 dB minimum
- THD: 0.001 % typical, 0.002 % maximum
- SFDR: 105 dB typical, 98 dB minimum
- Sinewave, 10 Hz, Gain 8, 2.25 VPP
- 100 Hz Filter, 1 ksps
- SNR: 91 dB typical, 90 dB minimum
- SINAD: 87 dB typical, 86 dB minimum
- THD: 0.003 % typical, 0.004 % maximum
- SFDR: 91 dB typical, 90 dB minimum
- Crosstalk, Sinewave all channels, Gain 1, 20 VPP, 50 R to IGND on channel under test 1 kHz Filter, 1 ksps, Balanced Input
- fIN = 300 Hz: 118 dB typical, 102 dB minimum
- fIN = 900 Hz: 110 dB typical, 102 dB minimum
- Noise, all filter settings: 0.2/G mVRMS typical, 0.3/G mVRMS maximum
- Warm-up Time: ≥ 30 minutes
- Control Interface
- Physical Interface: Two redundant network ports, 10/100/1000 Base-TX
- Software Interface: SCPI over VXI-11 protocol (VISA), TCP/IP, Web Interface
- Operating System Support: Windows 10
- Environmental
- Temperature: 5 °C to +50 °C (operational), -40 °C to +70 °C (storage only)
- Humidity: 5% – 95% (non-condensing)
- Size: 425 mm x 330 mm x 43.5 mm (excl. connectors)
- Weight: 5 kg
- Power Supply
- Input: Two redundant inputs, 85 – 264V AC, 47 – 63 Hz each
- Power: 40 W typical
Accessories
Accessories:
- 5725 Rack-Mount Kit
- 5726 Stackable Tabletop Feet Set
Resources
Resources:
There are no additional resources for this product.
